CC Cream – 03-015

Author Image

By: TOM BRANNA

Editor

CC Cream – 03-015
Ingredients
%

Phase A

  • Deionized water
  • 44.35
  • Albagel 4444 (BSI) (Bentonite)
  • 2.00
  • Dermofeel PA-3 (Kinetik) (Sodium phytate)
  • 0.10
  • ST 2541 (BSI) (Titanium dioxide (and) galactoarabinan)
  • 0.50
  • Lubrajel DV (BSI – Ashland)(Glycerin (and) glyceryl acrylate acrylic acid copolymer (and) propylene glycol)
  • 5.00

Phase B

  • Deionized water
  • 15.00
  • Rhodiacare T (BSI-Rhodia) (Xanthan gum)
  • 0.25
  • Hydrolite 5 616751 (Symrise) (Pentylene glycol)
  • 1.00

Phase C

  • Prolipid 141 (BSI – Ashland) (Glyceryl stearate (and) behenyl alcohol (and) palmitic acid (and) stearic acid (and) lecthin (and) lauryl alcohol (and) myristyl alcohol (and) cetyl alcohol)
  • 5.50
  • Escalol 557 (BSI-Ashland) (Octinoxate (ethylhexyl methoxycinnamate)
  • 5.00
  • Escalol 567 (BSI-Ashland) (Oxybenzone (Benzophenone-3)
  • 2.00
  • Escalol 587 (BSI-Ashland (Octisalate (ethylhexyl salicylate)
  • 2.00
  • Olive Squalane TX:0504 (BSI-Textron) (Squalane)
  • 1.00
  • Ceraphyl 424 (BSI-Ashland) (Myristyl myristate (and) myristyl laurate)
  • 1.00
  • Virgin Argan Oil TX:8121 (BSI-Textron) (Argania spinosa kernal oil)
  • 1.00
  • Shea Butter (BSI-Ashland) (Butyrospermum parkii)
  • 1.00
  • Timica Terra Brown (BSI-BASF) (Mica (and) iron oxides (and) titanium dioxide
  • 0.50

Phase D

  • Avenacare Oat Beta Glucan (BSI-Biovelop) (Beta glucan)
  • 5.00
  • Chione HD Infinite White S 130V (BSI-BASF) (Synthetic fluorphlogopite (and) titanium dioxide (and) tin oxide)
  • 2.00
  • Flamenco Silk Red 430M (BSI-BASF) (Mica (and) titanium dioxide)
  • 1.00
  • Marine Hydrolyzed Collagen LMW (BSI-Ashland) (Water (and) hydrolyzed collagen)
  • 1.00
  • Dermostatyl IS (BSI-Ashland) (Water (and) butylene glycol (and) hexapeptide-2 )
  • 1.50
  • SoftSphere LL (BSI) (Silica (and) lauroyl lysine)
  • 2.00
  • Optiphen MIT Plus (BSI-Ashland) (Methylisothiazolinone(and) phenethyl alcohol (and) PPG-2-methyl ether)
  • 0.30

Procedure

Phase A - Add hot water to main container and begin moderate propeller agitation. Sprinkle in Albagel, mix well for a minimum of one hour. Begin heating to 75-80°C. Add remaining phase A ingredients, mixing well after each addition. phase B - In a separate container premix phase B, add premix to main tank. Continue mixing and heating to 75-80°C. Phase C - In a separate container combine phase C with moderate mixing and begin heating to 75-80°C. Continue mixing and heating until uniform. When both main tank and Phase C are 75-80°C, slowly add phase C to main tank with homogenization. When batch appears uniform, turn off heat. Switch to side sweep mixing only for the remainder of the process. Begin cooling to room temperature. Phase D - When batch reaches below 40°C, add remaining phase D ingredients individually to the main container, mixing well after each addition.

More Information

Brenntag Specialties, Inc. 800-732-0562 • www.brenntag.com